note : all information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publ ication; however, this data sheet cannot be a ?controlled document?. current revisions, if any, to these specifications are maintained at the factory and are available upon your request. we recommend checking the revision level befo re finalization of your design documentation. ? 1995 elantec, inc. el5196c preliminary general description the el5196c is a fixed gain amplifier with a bandwidth of 600mhz, making these amplifiers ideal for todays high speed video and monitor applciations. the el5196c features integnal gain setting resistors and can be configured to give a gain of +1, -1 or +2. with a supply current of just 6ma and the ability to run from a single supply voltage from 5v to 10v, these amplifiers are also ideal for hand held, portable or battery powered equipment. the amplifier is also available with a fast acting disable. this disable will turn off in 10ns, and enable again in just 25ns, making the el5196c amplifier ideal for multiplexing applications. allowing the ce pin to float, or applying a low logic level will enable the amplifier. for applications where board space is critical, the el5196c is offered in both the sot23-5 and sot23-6 packages, as well as an industry standard 8-pin soic. the el5196c operates over the industrial tem- perature range of -40 c to +85 c. pin configurations out v s - v s + in- in+ sot23-5 1 2 3 5 4 - + el5196cw5 1 2 3 4 8 7 6 5 - + in- in+ v s - nc out v s + nc ce 8-pin soic el5196cs out v s - v s + in- in+ sot23-6 1 2 3 6 4 - + el5196cw6 ce 5 features ? gain selectable (+1, -1, +2) 600 mhz -3db bw @ av = +1 6ma supply current single and dual supply operation, from 5v to 10v fast enable, just 25ns (selected packages only) available in sot23-5 and sot23- 6 packages triple (el5396c) available 300mhz, 3ma product available (el5197c, el5397c) applications video amplifier cable drivers rgb amplifier test equipment instrumentation current to voltage converters ordering information part no package tape & reel outline # el5196cw5-t7 sot23-5 7 ? mdp0038 el5196cw5-t13 sot23-5 13 ? mdp0038 EL5196CW6-T7 sot23-6 7 ? mdp0038 el5196cw6-t13 sot23-6 13 ? mdp0038 el5196cs 8-pin soic - mdp0027 el5196cs-t7 8-pin soic 7 ? mdp0027 el5196cs-t13 8-pin soic 13 ? mdp0027 el5196c preliminary 600mhz fixed gain amplifier june 14, 2000
2 el5196c preliminary 600mhz fixed gain amplifier el5196c preliminary general disclaimer specifications contained in this data sheet are in effect as of the publication date shown. elantec, inc. reserves the right to make changes in the cir- cuitry or specifications contained herein at any time without notice. elantec, inc. assumes no responsibility for the use of an y circuits described herein and makes no representations that they are free from patent infringement. warning - life support policy elantec, inc. products are not authorized for and should not be used within life support systems without the specific written consent of elantec, inc. life support systems are equipment intended to sup- port or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. users con- templating application of elantec, inc. products in life support systems are requested to contact elantec, inc. factory headquarters to establish suitable terms & conditions for these applications. elan- tec, inc. ? s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. elantec, inc. 1996 tarob court milpitas, ca 95035 telephone: (408) 945-1323 (800) 333-6314 fax: (408) 945-9305 european office: 44-71-482-4596 june 14, 2000 printed in u.s.a.
amplifiers part # el5196c # of amps 1 bandwidth @ - 3 db (mhz) 600 min. gain fixed +1, - 1,+2 supply voltage range (min to max) (v) 2.25 to 5.5 supply current per amp (ma) 6 diff gain/ diff phase (%/ ? ) 0.01/0.01 input offset voltage max. (mv) 10 input voltage noise nv/hz 6.5 slewrate (v/ s) 3400 output current (ma) 120 current mode voltage mode disable clamp inputs to gnd outputs to gnd rail to - rail in rail to - rail out package p - dip package soic 8 package other sot23 - 5 data sheet pdf file
|